Skip to product information
1 of 2

Daisy Dips Nail Co.

Daisy Dip Activator (Step 3) - 15 mL

Daisy Dip Activator (Step 3) - 15 mL

Regular price $15.14 CAD
Regular price Sale price $15.14 CAD
Sale Sold out
Shipping calculated at checkout.

Activator is step #3 on the dipping process. It hardens the acrylic.

 

Liquids Care Instructions:

  1. Store liquids away from heat and sunlight.
  2. Always wipe the brushes to clean to prevent contamination before placing back into the bottle. Brushes will not harden if left out for minimal amounts of time, they can harden by contamination from powder or Activator not being cleaning off properly - we suggest "pinching" the bristles between layers of paper towels or napkins and removing excess liquid this way before placing back into the bottles.
  3. Use Brush Saver to clean off brushes that may have become contaminated or have hardened. Place the contaminated/hardened brush into the Brush Saver bottle and let sit for 2-5 minutes. When you remover the newly cleaned brush from the bottle, be sure to wipe off the excess brush saver and allow the clean brush to fully dry before placing back into the original bottle.
  4. Wipe any excess product that may have dripped onto the threads of the bottle and apply a thin layer of cuticle oil to prevent bottles becoming glued shut.

    Application Instructions:

    1. Cuticle Prep; push back cuticles and remove if needed. Lightly buff the nail bed to rough up surface for better adhesion. Apply Step 1: pH Nail Prep and allow to fully dry (about 30 seconds)
    2. Apply first layer of Step 2: Base Coat, one nail at a time, keeping a few millimeters away from the cuticle line to prevent any lifting as the nails grow.
    3. Dip finger at an angle, lay finger flat into powder or sprinkle powder on top of the nail, tap off excess powder. Use the nail stick or toothpick for clean up around the nail bed and let dry for 2 minutes before brushing off the excess powder. 
    4. Repeat this process on all fingers, doing 2-3 layers of Base Coat and Dip Powder, until desired look is achieved.
    5. Apply Step 3: Daisy Duo Activator TWICE and allow to dry for 2 minutes.
    6. Using a nail file, buffer block, or e-File; Shape and smooth the nails until desired look is achieved and repeat the process from #5.
    7. Apply two layers of Step 4: Shiny OR Matte Top Coat, allow 30 seconds in between layers for drying time. Allow 2-5 minute for second layer to fully dry as well.

    All Daisy Dips Liquids are LOW ODOR and HEMA FREE (hydroxyethyl methacrylate) which is a common allergen. 

     **UV Lamp is not required**

    Warning: For external use only. Keep out of reach of children. Keep away from heat, humidity, and sunlight. Discontinue use if irritation occurs.

    View full details